Quick Answer: How Long Is Thompson’S Water Seal Good For?

Can you apply Thompson’s Water Seal with a roller?

Even if you don’t want to buy a garden sprayer, you can still use plenty of other tools.

Paint rollers, paint pads, and brushes should still work just fine when you apply Thompson’s water seal..

Is it better to seal or stain a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

Can Thompson Water Seal go bad?

Acrylic- and latex-based sealer are both water-based. Similar to paint in its consistency and shelf life, if stored in a cool, dry place, it should last approximately five years.

How long does wood sealer last?

about 3 to 5 yearsA good quality solid or opaque wood sealer will last about 3 to 5 years on decks and possibly a little longer on outdoor furniture.

How many coats of Thompson Water Seal do I need?

2 coatsshake the can vigorously before use. Thompson’s Water seal has a slightly milky appearence in the can,but clears quickly upon application. For best results ensure the surface is as dry as possible. Apply 2 coats using brush,roller or sprayer.

How long does Thompson Water Seal need to dry before rain?

24 hoursBeside this, how long does Thompson Water Seal need to dry before rain? The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.

What is the best sealant for pressure treated wood?

7 Best Deck Sealers for Pressure Treated Wood- Reviews & Buyer’s GuideReady Seal 515 5-Gallon Pail Pecan Exterior Wood Stain and Sealer.Thompson’s Water Seal 041851-16 Transparent Stain, Cedar. … 3#1 Deck Premium Semi-Transparent Deck Stain.Ready Seal 505 5-Gallon Pail Light Oak Exterior Wood Stain and Sealer.More items…

What is the longest lasting deck sealer?

1. BEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. SEAL-ONCE MARINE Penetrating Wood Sealer is a clear water-based sealer, but it provides the protection you’d expect from an oil-based stain, penetrating right down into the wood fibers for long-lasting protection against moisture damage and mold growth.

Is Thompson Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

What is the best product to put on a wood deck?

Tinted sealers (also called translucent or transparent stain) are like a clear sealer with some colorant added. This is the most common product used on most decks, since it provides good protection against graying and cracking while allowing the natural grain of the wood to show through.

How often do I need to apply Thompson’s Water Seal?

every one to three yearsApplying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure. All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

What is the best way to apply Thompson’s Water Seal?

Surfaces must be thoroughly cleaned prior to application with a deck cleaner (like those in the Thompson’s® WaterSeal® cleaner line) applied according to label directions and cautions. If surface is damp or wet from cleaning or weather, allow the surface to dry thoroughly (a minimum of 48 hours) before application.

When should you seal your deck?

It is important to wait for the wood to dry before sealing a new deck, but at the same time, you don’t want to wait too long. Drying can take several months. We recommend beginning to test the wood around 90 days after your project is completed, but this is just a general suggestion.