Quick Answer: Can You Drill Above An Outlet?

Can a nicked wire cause a fire?

Factors such as nicked wires, loose connections, improper wire size, reversed polarity (hot and neutral wires connected to the wrong terminals) and poor or no grounding of metal parts of electrical equipment can cause fires, shock and electrocution..

Is it safe to drill above a light switch?

The vertical wires are typically pretty easy to avoid: avoid drilling above a receptacle or light switch. The horizontal runs should have enough space to avoid most damage, unless you drill into the hole in the stud that they pass through.

Do plug socket wires run up or down?

p.s. as a rule of thumb, if you have an older house with wooden floors, the socket cables will quite often be run under the floor and go up to the sockets. If you have concrete floors, they will usually come down from the ceiling to the sockets. In kitchens they sometimes run horizontally between sockets.

Can you put duct tape over an outlet?

One roll should cover every low-lying outlet in the house. … You can also use duct tape if you want it to stick a little better; however, duct tape could leave a sticky residue on your outlets and walls.

Can you nail above a fuse box?

Never for any reason unless you’re a trained electrician or installed everything your self, and know for 100% certainty where everything is, should you ever drill around a panel. Its nestled between two studs, so you could always drill into those. But you’re not supposed to cover or obstruct a fuse box.

How do you know if you’re drilling into a pipe?

If you do hit a pipe, Williams says, you’ll probably know it. “Even if the pipe is soft metal, it’s still going to offer a substantial amount of resistance,” Williams says. “And unless you hit it where it passes through a stud, your drill bit will probably deflect off of the curved surface.”

Can you cover up an electrical outlet?

As long as there are no wires inside the box, you can cover it with drywall. If the box is still acting as a junction box, however, and wires are joined inside it, the electrical code mandates a removable cover. Covers come in plastic or metal, and you attach them with machine screws.

What happens if you drill into a live wire?

Damage to electrical wiring from drilling into walls is a surprisingly frequent phenomenon – especially when buildings are being renovated. Not only do the lights go out, but you usually blow a fuse as well. With a bit of luck, you might only have to repair the cable sheath.

Do stud finders detect wires?

Using an electronic stud finder, you can detect live wires behind the walls or through the studs. An electronic stud finder is a tool that will let you find studs, beams, joists, or wires.

How do you know if there is an electrical wall?

Move the stud finder over the electrical wires. On metered finders, when they are exactly over the wire, the meter will read 120 volts, or 220 if you are in the vicinity of stove wires. A stud finder that uses a light band will show all the lights becoming illuminated when the stud finder is directly over the wire.

How close can you drill next to an outlet?

If there is a stud behind it then you should be ok. If it is just drywall then drill only through the thickness of the drywall. In other words just go 1/2 or so and do not push the bit all the way into the wall cavity. After you have made the hole you can see if there is any wire behind it.

Can I hang a picture above a plug socket?

Don’t hang pictures above light switches (or sockets, if you want to be on the safe side) or to the left/right of sockets. You should be fine, unless your house has form for weirdness.

Do you really need outlet covers?

Roughly 80 percent of all electrocution deaths are adult men. In short, electrocution death is extremely unlikely for anyone, and especially so for children. If you’re installing outlet covers to avoid accidental electrocution death, there are much better uses of your time.

Can you cover an outlet with a mirror?

If your outlet is over a mirror or glossy tiles, buy a mirrored outlet cover online or from a hardware store. Snap the cover over the outlet panel as a camouflaged alternative to paint.