Question: How Long Should Wood Dry Before Turning?

Is Ash a good wood for turning?

Ash is also our toughest timber in terms of tensile strength; its only weakness being that it is not durable outside but for turning vases, platters, bowls and all types of spindle work, including tool handles, it is a superb timber..

How dry should Wood be Before turning?

22% is dry enough to burn in the fire place. You could, if you wanted, turn it to final thickness, sand, and finish it without waiting for it to totally dry. Outside drying will get to 12% or slightly more or less depending if you are in thunderstorm country, or Death Valley.

Can you turn wet wood?

Because the wood is sensitive to quick changes in moisture content, it’s essential to completely turn the piece you’re working on within a relatively short period of time. … If the wood is really wet, I’ve found waiting ten minutes or so allows the surface to dry just enough to let the sandpaper to do its job.

What is the easiest wood to turn?

Try the soft maple or Poplar. Those are fairly soft and should turn very well. If you still have problems then it might be the tools, how you use them, or it could even be the lathe.

How difficult is wood turning?

But learning the basics of woodturning isn’t difficult. … Woodturners tend to be devoted to their craft, and many have little (if any) interest in other traditional fine woodworking skills since there is almost no end the projects that can be created on a lathe alone with the proper tools and techniques.

Is Apple wood good for turning?

Any fruit wood is good for turning, that includes fruit bearing woods found in the hedgerow. They can be prone to cracking if dried too quickly.

Is Cedar a good wood to turn?

Cedar is a nice wood to turn but it is soft. I’ve got a cedar bowl on my lathe now finishing it up. It’s going to be very nice. Just be careful and use sharp tools.

Is Mahogany good for turning?

The real stuff turns and finishes beautifully, but it’s open-pored compared to, say, cherry or maple, so you’ll get a different effect under finish. Mahogany is a super turning wood…….just make sure to use breathing protection to keep the dust out of your lungs! Remember, in a moments time, everything can change!

What wood is best for turning?

Best Woods for Turning Some of the most popular domestic hardwoods for turning include birch, ash, maple, cherry, and walnut. Exotic hardwoods are also popular for woodworking projects because of their distinct patterns and colors.

Is Pine good for wood turning?

Pine is an excellent wood for beginning turners. It is a soft wood and is easy to shape on the lathe. Cutting with a gouge or skew chisel produces a better finish than a scraper when turning between centres. … You can see the cells of the wood where the cut has gone across grain in the bottom.

Can you turn fresh cut wood?

Turning freshly cut timber, full of sap and the colours looking really bright, is a great pleasure. It gives great opportunities in almost every way. … You can combine dramatic natural colour contrasts from dark hard wood through to light sap wood, to a rim of dark bark. And the cost of the wood can be negligible.

How do you dry green wood without cracking it?

To prevent this undesirable drying, shrinking and cracking, the simple solution is to keep the outside of the log wet. In other words, keep the water in the wood. Many carvers go to great lengths to avoid using green, freshly cut wood.